| Place of Origin: | CHINA |
|---|---|
| Model Number: | QFMH |
| Minimum Order Quantity: | 10PCS |
| Price: | USD 10/PC |
| Packaging Details: | CARTON |
| Delivery Time: | 5 DAYS |
| Payment Terms: | L/C, D/P, T/T, Western Union |
| Supply Ability: | 10000PCS MONTH |
| Cooling Type: | Air Cooling | Hardness: | HRC50-60 |
|---|---|---|---|
| Material: | 20CrMnTi | Product Name: | BT Tool Holder |
| Surface Treatment: | Polishing | Tolerance: | High Precision |
| Usage: | Cutting Tool | Weight: | 0.5-2kg |
| TYPE: | Bt40 Er32 Collet Chuck | MODEL: | BT40 ER32 |
| Milling Cutter Type: | Milling |
CNC Toolholder BT40 ER Collet Chuck ,The runout of the tool holder is the joint action of the whole turret system, the turret, the collet and the nut.In order to achieve the best clamping accuracy, it is recommended to use our tool holder, collet and nut.The spring collet chuck tool holder includes a spring chuck for clamping and positioning the tool. Spring chuck BT tool holder has better tool clamping and higher precision tool positioning ability. The clamping range of ER type chuck is large, but its taper is small and its elasticity is large, which requires high precision of matching
Tool holders balanced to G2.5 at 25,000 RPMs
* Coolant-through capability
| SpecifiCATEEion | Chucking dia d | d1 | d2 | L | L1 | M | Nut | Collet | Spanner | Weight(KG) |
| BT50-ER16-100 | 3-10 | 28 | 28 | 100 | 62 | M22*1.5 | ER16A | ER16 | ER16A | 4.3 |
| BT50-ER16-150 | 150 | 112 | 4.5 | |||||||
| BT50-ER20-100 | 3-13 | 34 | 34 | 100 | 62 | M25*1.5 | ER20A | ER20 | ER20A | 4.3 |
| BT50-ER20-150 | 150 | 112 | 4.7 | |||||||
| BT50-ER25-100 | 3-16 | 42 | 40 | 100 | 62 | M32*1.5 | ER25UM | ER25 | ER25UM | 4.4 |
| BT50-ER25-150 | 150 | 112 | 5.5 | |||||||
| BT50-ER32-100 | 3-20 | 50 | 50 | 100 | 62 | M40*1.5 | ER32UM | ER32 | ER32UM | 4.8 |
| BT50-ER32-150 | 150 | 112 | 5.3 | |||||||
| BT50-ER40-100 | 6-26 | 63 | 60 | 100 | 62 | M50*1.5 | ER40UM | ER40 | ER40UM | 4.4 |
| BT50-ER40-150 | 150 | 112 | 5.5 |
TOOL HOLDER What can we do about rust prevention?
1, to reduce the body's water vapor and handle contact, try not to grab the knife in freehand, freehand knife after grabbing anti-rust oil;
2. When installing and removing the handle by hand, after the handle is removed, it is a good habit to apply anti-rust oil before installation;
3. Regularly measure the concentration of coolant to prevent the decrease of the concentration of the coolant, and the bacteria multiply and breed, accelerating the corrosion of the shank;
4. The anti-rust aging effect of coolant is different, so choose the right anti-rust coolant;
5. During the holidays, cleaning of the knife handle before the holiday is indispensable;
6. If the holder is not used for a long time, be sure to apply anti-rust oil and regularly apply anti-rust oil.
According to incomplete statistics, the service life of the tool holder is often 5-8 years. BT30 TOOL HOLDER,ER collet chuck, The tool holder is mostly calculated by the factory as an approximate fixed asset. The ratio of the consumption capital of the tool holder used in the factory to the consumption of cutting tools is approximately 2:8. Therefore, the choice of high-quality, easy-to-use tool holders, although the initial investment is slightly increased, but it can save considerable expenditure on cutting tool consumption in the future, supplemented by effective protective methods, will make the boss assured, let employees use Comfortable.
