NT FMB Face Cutter CNC Tool Holder Milling Cutter Face Mill Holder

NT FMB Face Cutter CNC Tool Holder NT milling cutter CNC face mill holder

NT FMB Face Cutter CNC Tool Holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the vertical disc cutter, the set type end mill, high speed and high precision machining .Mechanical spindle and cutting tools and other accessories.High Precision NT shank Tool Holder ,balanced G6.3 or G2.5 For choose.

NT Face Milling Holder SpecifiCATEEions
1, NT Face Milling Holder Material: 40Cr, 20CrMnTi
2. NT Face Milling Holder Type: FMA, FMB
3, NT Face Milling Holder Model: FMA25.4, FMA31.75, FMA38.1, FMA50.8
FMB22, FMB27, FMB32, FMB40,
4, NT Face Milling Holder Accuracy: 0.005mm
5, Hardness: 52-58HRC
6, NT Face Milling Holder Usage: For holding like shell mill cutters
7, Standard: DIN2080,

8, Surface; heat treament, sand blasting

NT milling cutter CNC face mill holder, NT toolholder was commonly used in ordinary manual broach machine tools before. NT tool handle has internal thread at the rear end of its 7:24 cone, which is connected with the threaded pull rod of the machine tool to tighten the tool handle. For example, the thread of NT40 is M16. BT toolholder has an internal thread at the rear end of its 7:24 cone, which is the upper puller, and the puller is tensioned by the puller claw in the machine tool spindle. In other words, except for the structural dimensions, the NT tool handle is pulled tightly and loosened by the rotating spindle pull rod. The shank models of ordinary vertical milling machines are: the shank models of vertical milling machines are usually divided into two types, one is the straight shank type milling cutter, which usually has a straight shank milling cutter with a diameter of less than 20mm. The other is the model of Morse taper shank milling cutter, which is divided into three types of Morse taper. Usually, the taper of the shank is equipped with the diameter of the cutter. Usually, the diameter is 12 mm - 50 mm. The size of the milling cutter adopts three types of Morse taper.